Excavators for Hire

GPS-integrated Excavators for any Project

AUSDIG offers a comprehensive range of mini, midi, medium, and large excavators for hire across Australia. Sourcing our excavators from only top brands such as Caterpillar and Hitachi, we ensure you always get the best of the best. Our well-built and well-maintained machines are thoroughly inspected prior to every project we undertake, so they always work at top performance, no matter the ground conditions.

Whether working in a tight-access area in Melbourne, the beaches of the Central Coast, or on the slopes of the Flinders Mountains, AUSDIG’s excavators are built for your project. With GPS-integrated systems for increased accuracy and productivity, our plant and equipment enable us to support projects of any size and type from start to finish, wherever it is across Australia.

Australia Map

Our Excavators

We offer Hitachi mini excavators to any project requiring tight-access excavation or excavation around infrastructure including powerlines.

Our mini excavators are fully mine spec, with safety rails, anti-burst valves, cut out switches (internal and external), and exhaust socks to comply with all mine site regulations. In line with general safety regulations on construction sites across Australia, they feature tilt hitches and hydraulic safety pins.

Both compatible with buckets, ripper attachments, and rock breakers, these mini excavators are versatile and fully equipped for a range of projects. Don’t be fooled by their size, either – as rubber tracked excavators, these Hitachi minis can operate on all terrains, packing a punch wherever you need them.

AUSDIG Hitachi 2t ZX17U 5S

Hitachi ZX55U-5 5.5 Tonne Excavator

Our 5.5 tonne excavator features a Prolec height watch system and is also compatible with our 1200mm bucket attachments for hire.

Hitachi ZX55U-5 5.5 Tonne Excavator

  • Full Mine Spec – including anti-burst valves, cut out switch (both external and internal) and exhaust sock
  • Tilt Hitch With Hydraulic Safety Pin
  • 300mm, 450mm, 600mm, 1200mm trim, sieve bucket
  • Ripper & Rock Breaker
  • Auger drive 300mm, 450mm, 900mm
  • Rubber Tracks
  • Prolec Heightwatch System
AUSDIG Hitachi 5t ZX55U 5 excavator

Hitachi ZX17U-5S 1.7 Tonne Excavator

Our 1.7 tonne excavator features a height limiter and is also compatible with our 150mm tilt bucket attachments for hire.

Hitachi ZX17U-5S 1.7 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • 150mm, 300mm, 450mm, 600mm & Trim
  • Ripper & Rock breaker
  • Tilt Hitch with Hydraulic Safety Pin
  • Rubber Tracks
  • Height limiter
  • All other required attachments are available
Hitachi ZX 33U 5A

Hitachi ZX33U-5A 3.5 Tonne Excavator

AUSDIG’s Caterpillar mini and midi excavators for hire are fully mine spec, compatible with a range of machine attachments, and available with or without an expert machine operator across Australia. These excavators come with 3D GPS, LPS & UTS systems, tilt hitch and hydraulic safety pins, dual grade laser boom receivers, rubber tracks, and Prolec Heightwatch systems.
CAT 305

Caterpillar 305E2 5 Tonne Excavator

308 ECR 8 Tonne

Caterpillar 308ECR 8 Tonne Excavator

Caterpillar 330 30 Tonne Excavator

Caterpillar 330 30 Tonne Excavator

Caterpillar 329 EL 30 Tonne Excavator

Caterpillar 329 EL 30 Tonne Excavator

Cat 315 Next Gen

Caterpillar 315 Next Gen 15 Tonne Excavator

All our Hitachi midi and medium excavators are fully mine spec, including safety rales, anti-burst valves, cut out switches (both internal and external), and exhaust socks. They all feature safety systems including tilt hitches, hydraulic safety pins, and height and slew restrictions. All include GPS-integrated systems and are compatible with a wide range of attachments including tilt buckets, rippers, rock breaker attachments, and auger drives.

AUSDIG Hitachi 8t ZX85US 8 excavator

Hitachi ZX85US 8 Tonne Excavator

Our rubber-tracked 8 tonne excavator comes with Topcon GPS, LPS & UTS dual grade laser and boom receivers, and a PME 400 height and slew regulators.

AUSDIG Hitachi 13t ZX135US 5 excavator

Hitachi ZX13.5 13 Tonne Excavator

Our 13 tonne excavator comes with 3D GPS, LPS & UTS, LOADRITE L2180 loader scales, and a Prolec PME 500 dig, height, slew, radius, and cut-out regulator.

Hitachi ZX13.5 13 Tonne Excavator

  • Full Mine Spec – including safety rails, anti-burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS / LPS system – LPS is perfect for those sites where GPS will not work e.g. Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, whereas the LPS system can achieve within 1-5 mm precision off total station
  • LOADRITE L2180 Loader Scales
  • Doherty Tilt hitch system & Hydraulic Safety Pin
  • 450mm, 600mm, 750mm, 900mm, 1000mm, 1200mm, and 1400mm, trim buckets
  • Ripper, Rockbreaker & Augers 450mm, 600mm, 900mm and 1200mm
  • Prolec PME 500 System (Dig, height, slew, radius, cut-out)
  • All other required attachments are available
AUSDIG Hitachi 21t ZX210 excavator

Hitachi ZX210 21 Tonne Excavator

Our 21 tonne excavator comes with 3D GPS, LPS & UTS, LOADRITE L2180 loader scales, and a Prolec PME 500 dig, height, slew, radius, and cut-out regulator.

Hitachi ZX210 21 Tonne Excavator

  • Full Mine Spec – including safety rails, anti-burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS / LPS system – LPS is perfect for those sites where GPS will not work e.g. Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, whereas the LPS system can achieve within 1-5 mm precision off total station
  • LOADRITE L2180 Loader Scales
  • Doherty Tilt hitch system & Hydraulic Safety Pin
  • 450mm, 600mm, 750mm, 900mm, 1000mm, 1200mm, and 1400mm, trim buckets
  • Ripper, Rockbreaker & Augers 450mm, 600mm, 900mm and 1200mm
  • Prolec PME 500 System (Dig, height, slew, radius, cut-out)
  • All other required attachments are available
AUSDIG Hitachi 26t ZX260LC 5 excavator

Hitachi ZX260LC-5 26 Tonne Excavator

Our 26 tonne excavator comes with 3D GPS, LPS & UTS and a Prolec PME 400 dig, height, slew, radius, and cut-out regulator.

Hitachi ZX260LC-5 26 Tonne Excavator

  • Full Mine Spec – including safety rails, anti-burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS / LPS system – LPS is perfect for those sites where GPS will not work e.g. Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, whereas the LPS system can achieve within 1-5 mm precision off total station
  • Tilt hitch & Hydraulic Safety Pin
  • 600mm, 1700mm, 900mm, 1000mm, 1200mm, 1400mm & 1500mm Trim & Sieve bucket & Compaction Wheel
  • Ripper & Rockbreaker
  • Auger drive 450mm, 600mm & 900mm & 1200mm
  • Prolec PME 400 System (Dig, height, slew, radius, cut-out)
  • All other required attachments are available
AUSDIG Hitachi 29t ZX290LC 5 excavator

Hitachi ZX290LC-5 29 Tonne Excavator

Our 29 tonne excavator comes with 3D GPS, LPS & UTS, and a Prolec PME 500 dig, height, slew, radius, and cut-out regulator.

Hitachi ZX290LC-5 29 Tonne Excavator

  • Full Mine Spec – including safety rails, anti-burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS / LPS system – LPS is perfect for those sites where GPS will not work e.g. Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, whereas the LPS system can achieve within 1-5 mm precision off total station
  • Doherty Tilt hitch system & Hydraulic Safety Pin
  • 450mm, 600mm, 750mm, 900mm, 1000,mm, 1200mm, and 1400mm, trim buckets
  • Ripper, Rockbreaker & Augers 450mm, 600mm, 900mm and 1200mm
  • Prolec PME 500 System (Dig, height, slew, radius, cut-out)
  • All other required attachments are available
AUSDIG Hitachi 36t ZX360LC 5 excavator

Hitachi ZX360LC-5 36 Tonne Excavator

Our 36 tonne excavator comes with a Trimble 3D GPS system, rotary cover, and Prolec PME 500 dig, radius, and cut-out regulator.

We offer Caterpillar medium excavators for hire with 3D GPS systems, hydraulic safety pins, and full mine spec features including safety rails, anti-burst valves, cut out switches (internal and external), and exhaust socks. All our Caterpillar excavators are compatible with a range of attachments for hire, including buckets, rippers, rock breaker attachments, and auger drives.

AUSDIG Caterpillar 14t 314CR excavator

Caterpillar 314CR 14 Tonne Excavator

Our Caterpillar 14 tonne excavator comes with 3D GPS and LPS, a dual grade laser and boom receiver, rubber tracks, and a Prolec heightwatch system.

Caterpillar 314CR 14 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS/ LPS system – LPS is perfect for those sites where GPS will not work e.g Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, where as the LPS system can achieve within 1-5 mm precision off total station
  • Ripper & Rock Breaker
  • Auger drive 350mm, 400mm, 900mm
  • Rubber Tracks
  • Prolec Heightwatch System – for digging under power lines
  • All other required attachments are availiable
AUSDIG Caterpillar 25t 325F excavator

Caterpillar 325F 25 Tonne Excavator

Our Caterpillar 25 tonne excavator comes with 3D GPS and LPS, a dual grade laser and boom receiver, and a Prolec PME 400 weightwatch system.

Caterpillar 325F 25 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • 3D GPS/ LPS system – LPS is perfect for those sites where GPS will not work e.g Under tree cover, under/around bridges, deep excavations or inside buildings where there is no clean view to the sky. The LPS system works on the same 3D models as GPS and the excavator can switch between GPS and LPS if the site requires. The GPS system can achieve within 30 mm precision, whereas the LPS system can achieve within 1-5 mm precision off total station
  • Tilt Hitch & Hydraulic Safety Pin
  • Dual Grade Laser & Boom Receiver
  • 600mm, 750mm 900mm, 1000mm, 1200mm, 1400mm Trim & Sieve buckets & Compaction Wheel
  • Rockbreaker & Ripper
  • Auger drive 450mm, 600mm, 900mm, 1200mm up to 9m deep
AUSDIG Caterpillar 28t 328D excavator

Caterpillar 328D 28 Tonne Excavator

Our Caterpillar 28 tonne excavator comes with Topcon 3D GPS, a dual grade laser and boom receiver, and auger, bucket, and compaction wheel compatibility.

Caterpillar 328D 28 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • Topcon 3D GPS system
  • Hydraulic Safety Pin
  • Dual Grade Laser & Boom Receiver
  • 600mm, 900mm ,1200mm, 1500mm tilt, trim & sieve bucket, compaction wheel
  • Rock breaker & Ripper
  • Auger Drive 450mm, 600mm, 900mm & 1200mm
  • All other required attachments are available
AUSDIG Caterpillar 29t 329EL excavator

Caterpillar 329EL 29 Tonne Excavator

Our Caterpillar 29 tonne excavator comes with Topcon 3D GPS, a dual grade laser and boom receiver, and is compatible with a range of machine attachments.

Caterpillar 329EL 29 Tonne Excavator

  • Full mine spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • Topcon 3D GPS system
  • Tilt Hitch & Hydraulic Safety Pin
  • Dual grade laser & boom receiver
  • 600mm, 900mm, 1200mm, 1400mm, 1500mm, trim & sieve buckets & compaction wheel
  • Ripper & rammer 3288 hammer rock breaker
  • Auger drive 450mm, 600mm, 900mm & 1200mm
  • All other required attachments are available
AUSDIG Caterpillar 36t 336DL excavator

Caterpillar 336DL 36 Tonne Excavator

Our Caterpillar 36 tonne excavator comes with a Trimble 3D GPS system, dual grade laser and boom receiver, and comprehensive machine attachment compatibility.

Caterpillar 336DL 36 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • Trimble 3D GPS System
  • Hydraulic Safety Pin
  • Dual Grade Laser & Boom Receiver
  • 600mm, 750mm 900mm, 1200mm, 1500mm, trim, tilt & sieve buckets & Compaction wheel
  • Ripper & Rock breaker Rammer 3288 & 4099 Hammer
  • Auger Drive 450mm, 600mm, 750mm, 900mm & 1200mm
  • All other required attachments are available
AUSDIG Caterpillar 45t 345DL excavator

Caterpillar 345DL/F 45 Tonne Excavator

We supply Caterpillar 45 tonne excavators compatible with our 750mm digging bucket, 1500mm tilt bucket, and hammer attachments.

Caterpillar 345DL/F 45 Tonne Excavator

  • Full Mine Spec – including safety rails, anti burst valves, cut out switch (both external and internal) and exhaust sock
  • Hydraulic Safety Pin
  • 750mm, 900mm digging bucket
  • 1500mm trim bucket
  • Ripper and rockbreaker 9099 hammer
  • All other attachments

Hire an experienced civil contractor for your next project.

Get in touch

Get an experienced civil contractor on your next project by contacting us today. We serve projects of any size across Australia with construction and earthmoving services, GPS-integrated plant and equipment, and expert machine operators to boot. Just call the friendly AUSDIG team or fill out our online form, and we will get back to you soon with a personalised quote including all the machines and services you need to get your project sorted end-to-end.

TQCSI certificates
CCF SA Member 10 Years
AUSDIG logo